How to Install Your Showerly in 2 Minutes
No tools. No plumber. No landlord permission needed.
What's in the Box
- 1x Showerly 6-mode handheld shower head
- 1x Stainless-reinforced hose (59 in / 150 cm)
- 1x Universal hose adapter
- 1x Carbon filter cartridge (pre-installed)
- 2x Rubber washers
- 1x Plumber's tape
Step 1 — Remove Your Old Shower Head
Turn it counter-clockwise by hand. Most heads come off without any tools. If it's stuck, use a cloth for grip — no wrench needed.
Step 2 — Wrap the Thread
Wrap the shower arm thread 2–3 times with the included plumber's tape. This ensures a leak-free seal.
Step 3 — Attach Showerly
Hand-tighten the universal adapter onto the shower arm, then connect the hose and shower head. Do not over-tighten.
Step 4 — Test for Leaks
Turn the water on and check the connection point. If you see any drip, give it one more quarter-turn by hand.
Step 5 — Choose Your Spray Mode
Rotate the head to select from 6 spray modes: Rainfall, Jet, Mist, Massage, Water-saving, and Mixed.
Compatibility
Showerly fits standard US 1/2-inch NPT shower arms — the fitting used in virtually every US home and apartment. If your shower arm is a standard threaded pipe roughly the diameter of a nickel, it fits.
When You Move Out
Simply reverse the steps. Unscrew Showerly, re-attach your original shower head. No damage, no traces left behind.
Need Help?
Contact us at support@showerly.com and we'll walk you through it.